• PEEK — a polyetheretherketone with excellent individual characteristics and is part of the thermoplastic high-temperature plastic group as it maintains its property profile in high-temperature ranges above 100 °C. PEEK, combined with chopped fiber is used in high-strength applications over 150C. APPLICATION EXAMPLES: Piston rings, Fastening hardware, Medical implants, Sliding components

• PEK — similar to PEEK and best suited for high strength, high temperature applications. PEK is an important material for automotive, aerospace, nuclear, electronics, food and even medical industries. APPLICATION EXAMPLES: LED Light parts, Unmanned Aerial Vehicle (UAV) structures, Transport planes, EPS Gear, Steering Column Adjust, Signal Relays, Endoscopy, Chromatography

• PEI — Polyetherimide (PEI) is an thermoplastic with high mechanical strength and rigidity. The material has high degrees of toughness, chemical resistance, superior limiting oxygen index and dimensional stability, besides demonstrating a high creep strength over a wide temperature range. APPLICATION EXAMPLES: Aerospace parts

• PPS — Polyphenylenesulphide (PPS) is a high temperature thermoplastic and high resistant polymer with high strength and hardness. Besides it has a low water absorption, good dimensional stability and excellent electrical properties. APPLICATION EXAMPLES: Coil formers, Bobbins, Terminal blocks, Electrical components, Lamp housings.

• PBT — belongs to the group of thermoplastic linear polyesters. PBT is typically reinforced with fibers and provides for high density, high degree of toughness and good thermal and dimensional stability. The fiber reinforcement makes PBT suitable for higher strength requirements like in industrial components and electronics industries. APPLICATION EXAMPLES: High power lighting components, Ignition rotors, Distributor caps

• PA6, PA66 — Technical thermoplastics reinforced with fiber, PA6 and PA66 (with a higher melting point that PA6) have a high thermal stability and are best suited for automotive industries and mechanical engineering applications because of their high toughness and chemical and abrasion resistance. APPLICATION EXAMPLES: Underbonnet automobile parts and most components on Wind-surfers.

• POM — a thermoplastic produced by the polymerisation of formaldehyde. It is a versatile engineering plastic possessing varied properties, designed for use in construction and automotive industries. It combines high rigidity, with mechanical strength and affords good elastic properties, high toughness, dimensional stability and excellent sliding friction properties. APPLICATION EXAMPLES: Gears , Sliding and guiding elements, Housing parts, Nuts, Fan wheels, Pump parts, Valve bodies.

• PPE + PS — A standard thermoplastic, PPE is usually only used after being modified by the addition of PS and reinforced with glass fiber. The material provides for high strength, hardness and rigidity with low moisture adoption. Due to its excellent dimensional stability and impact strength, it is suitable for components that face high levels of stress, like electronics. APPLICATION EXAMPLES: Electronic equipment like Printer cartridges, Housing equipment

• PC — Glass-reinforced polycarbonate is finding principal applications in designs where metals, particularly die-cast aluminum and zinc, are commonly used. The addition of glass fibers to polycarbonate in various amounts (10%, 20%, 30% and 40%) increases tensile strength, stiffness, compressive strength, and lowers the thermal expansion coefficient. GF PC has excellent impact resistance and dimensional stability and is tougher than most plastics. APPLICATION EXAMPLES: Impact shields, Electrical components, Scientific and analytical instruments, Fluid-handling components.

• PA — Polyamides are polymers containing monomers of amides, joined by peptide bonds. PolyAmides have excellent impact strength and notch impact strength, very high chemical resistance and excellent stress cracking resistance. APPLICATION EXAMPLES: Bearings, Automotive parts

• ABS — a thermoplastic co-polymerisate made from acrylonitrile, butadiene and styrene monomers. ABS types with different combinations, have a wide range of properties. ABS is extra tough, offers high strength and hardness, a high degree of chemical resistance, is virtually scratch-proof and has excellent machining properties. APPLICATION EXAMPLES: Carbon filaments in cables, Mirror housings, Hair dryers, Housing components, Musical instruments.

FLAME RETARDANT PLASTICS

• Halogenated Flame Retardant Plastics
• Non-halogenated Flame retardant plastics.

GLASS FIBER REINFORCED PLASTICS

• PC + Chopped Glass Fiber
• Glass Fiber + Polyetherimide
• Polyphenylene Sulfide (PPS) + Glass Fiber Reinforced + PTFE Lubricated

MINERALS REINFORCED

• PA + Short Glass Fiber + mica
• ABS + Mica + Glass Fiber
• Unsaturated Polyester + Mica
• PC + PET + Talc
• PEEK + Glass Fiber + Talc
• PP + Mica

CARBON REINFORCED

• PEK + Carbon Fiber
• POM + Carbon Fiber
• PPE + Carbon Fiber
• ABS + Carbon Fiber

BIO REINFORCED PLASTICS

• PP + Jute
• PP + Coir
• PP + Rice Husk
• PP + Chicken Feather
• PP + Wood

BLENDS & ALLOYS

• Acrylonitrile Styrene Acrylate (ASA)+PVC
• ASA + PC
• ASA + PA
• ABS + NYLON
• PPO + PA
• ABS + Pa6
• PP + Pa6
• PMMA + ABS